Price : $12.50
List Price :
You Save : $7.24 (37%)
Item Description
Amazon.com Product Description
The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The Firex i4618 smoke alarm delivers countless positive aspects for installers and homeowners, such as its painless-access slide load front battery door.
This alarm is powered by your home’s electricity and will interconnect with other smoke alarms in your property. Authorities recommend interconnected alarms, considering that when one sounds, they all sound, supplying an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your residence, regardless of where the fire begins.
This alarm utilizes ionization sensing engineering. Ionization sensing alarms may well detect invisible fire particles (connected with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may well detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to aid insure maximum detection of the a number of varieties of fire that can occur within the dwelling.
Firex i4618 Hardwire Smoke AlarmUser-Friendly Capabilities
- Uncomplicated access slide load front battery door
- Battery backup provides protection in case of a power failure
- Interconnectable with up to 24 devices (of which 18 can be initiating) like smoke, CO and heat alarms
Slide load front battery door delivers straightforward access for changing battery backup. .
The i4618 smoke alarm delivers simple and easy installation attributes. .
Delivers the recommended protection of an interconnected program. When a single alarm goes off, they all do. .
Straightforward Installation
- Front battery pull tab enables battery activation without having removing alarm from mounting bracket.
- Massive mounting base tends to make mounting less complicated, protects surface paint from dirt and covers imperfections.
- Pre-stripped wiring harness with easy off cap does not call for stripper tool. Tinned strands boost conductivity and wire nut grip.
Fewer Callbacks
- Big centrally positioned Test/Hush¨ alarm control button.
- Dust cover protects sensor from contaminates during construction decreasing nuisance alarms.
User Friendly Attributes
- Simple and easy access front loading battery door.
- Battery backup offers protection in case of power failure.
- Interconnectable with up to 24 devices (of which 18 can be initiating) like smoke, CO and heat alarms. See user’s guide for total instructions.
Interconnectable for Enhanced SafetyFire and consumer professionals advocate interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are additional at risk of being a victim of a tornado than of a property fire. Essentially the opposite is correct. Fires are even more widespread than any other disaster that strikes a family members at home, and can come to be deadly in minutes.
You have on typical less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when 1 goes off, they all go off, are named interconnected alarms. These alarms produce extra warnings in more areas, giving your family additional time to escape a house fire. Homes built just after 1993 are required by creating codes to have interconnected alarms that are wired into their electrical program.
Interconnects with Other DevicesInterconnects with all Kidde, Firex, Fyrnetics, Lifesaver and Nighthawk alarms, strobe lights, and relay modules with interconnect functionality.
Trademarked Hush Function for ConvenienceBy pressing the Hush button, you can quickly and safely silence nuisance alarms caused by non-emergency scenarios, such as overcooked dinners.
This alarm's Intelligent Hush feature has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This function is to be utilised only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not as well dense, the alarm will silence quickly. The red LED will illuminate for 1.5 seconds every single 8 seconds even though in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset following approximately 8 minutes and sound the alarm if particles of combustion are nonetheless present. Intelligent Hush can be employed repeatedly till the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period.
Reliable 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only helps safeguard you if it's operating, this unit capabilities a red LED that flashes every single 30 to 40 seconds to indicate that it is operating appropriately. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
The alarm’s standard 9-volt battery offers continuous protection against smoke and fire hazards, even through power outages. The unit presents a low battery warning that concerns a short chirp each 30 to 40 seconds for at least seven days just before losing power, letting you know that it is time to modify the battery.
The unit measures just five.6 inches in diameter and 1.8 inches deep, and it features a neutral, white finish. It consists of tamper resist characteristics to deter vandalism or theft.
This alarm is UL listed, so you can be confident of its high quality, and it is backed by a five-year limited warranty.
About Kidde: A UTC Fire Security Brand Renowned for international leadership in fire detection and suppression, Kidde delivers solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the improvement of the world's 1st wireless networked smoke detectors in 2004.
What is in the BoxOne i4618 ionization smoke alarm with mounting bracket and mounting hardware, a single 9 volt battery, a five-year restricted warranty and a bilingual user's manual.
The 120 volt Firex 4618 Pro Basic smoke detector has an ionization Sensor, fast connect power harness, is multi-station interconnectable, has a 5 year warranty, and is not attainable to members in Iowa, Oregon Or Vermont.
See all Product Description
Buyer Evaluations
My house was built in 2001, and it was equipped with Firex 120-1072B units in every room wired for interconnectivity. One particular of my units began to sound randomly even when there was no fire. I tried altering the battery, but I nevertheless had the exact same outcomes. So after searching online, I discovered that the Kidde i4618 is the present replacement model.
Just after purchasing the model, I was hoping that I could use an adapter among the wiring in my Firex unit and the Kidde. On the other hand, I discovered that I was mistaken in what I thought I had read. I am about as unhandy a man as they come, and I truly wasn't looking forward to rewiring for the new unit. The hardest portion of the approach turned out locating the correct breaker as mine are not labeled. At least for my residence (please know that yours may well nicely be unique), the smoke detectors were on a dedicated breaker. When I identified it and switched it off, it was rather simple and easy from there. I removed the two screws from the bracket of the Firex unit and then uncapped the wires. The Firex wires had been hassle-free to remove. I rewired black, white, and red as indicated and put the yellow caps back on to cover the wires. Then it was a straightforward matter of screwing in the new mount, connecting the wire, and twisting the Kidde unit into location. Once I flipped the breaker back on, almost everything was back to standard.
There is one good thing on these new units. The battery door is on the face of the unit rather than the back. The old Firex unit has the battery in the back, and it was a pain to replace the battery. One more good improvement of the Firex unit is the power connector is substantially less difficult to plug and unplug with no getting insecure.
So if this is the replacement for your old Firex smoke alarm, don't hesitate to get this a single from Kidde. I'm pleased with the results, and I think you will be also. Please feel absolutely free to ask concerns in the comments section beneath.
We moved into a house that was built back in 1985. Along with a multitude of other little fixes and updates that required carrying out, I noticed that the upstairs smoke detector was seeking a tiny loose on the ceiling. Upon giving it a twist, the bracket broke, and the detector subsequently hung in a jaunty, festive way from just the wires. And I noticed that this was the ORIGINAL smoke detector, dated from 1985. Okay, there's one other point needing replaced.
Installation was a breeze - cut the power, pull the old a single, match the appropriate wires on the harness (white/white, black/black, red/red), screw in the new mounting bracket, plug it in, lock it in place, turn the power back on.
BZZZZZZZZZZZZZZZZZZZZZ / BEEEEEEEEEEEEEEEEEEEEP!
Oops! The 2010 model smoke detector didn't want to play well with the other 1985 smoke detector that I hadn't even observed downstairs, and they were both going off simultaneously. Okay, swap that a single out too, and... blissful silence, and a comforting green light shines from each and every one.
Trust me: if I could install this, Anybody can install this. I cannot even hammer a nail straight.
Related Product
No comments:
Post a Comment