Price : $30.09
List Price :
You Save : $9.90 (25%)
Item Description
Amazon.com Product Description
The Kidde PI2010 Battery-Operated Dual Sensor Smoke Alarm combines photoelectric and ionization sensing technologies into one unit to deliver broad detection against smoldering and flaming fires. Experts advocate that for optimal protection you have both forms of sensing engineering in your residence. This smoke alarm's trademarked Hush feature makes it possible for you to silence nuisance alarms, although an indicator LED and test function let you without difficulty confirm that the alarm is working.
The Kidde PI2010 Smoke Alarm:
- Employs both photoelectric and ionization sensors.
- Characteristics a hush button to silence the alarm for non-emergency scenarios like a smoky dinner.
- Compact style blends in seamlessly with your residence decor.
- Wire-in smoke alarm with 9V battery backup.
With two distinctive sensors, you'll get warnings sooner no matter the type of fire. .
Be assured of your home's safety with the PI2010 smoke alarm. .Dual-Sensor Technology for Improved SafetyExperts divide house fires into two groups: flaming and smoldering. Flaming fires result from flammable liquids and cooking accidents, although smoldering fires most frequently happen when smoking materials, such as cigarettes, are left unattended. Ionization smoke sensors may perhaps detect smaller, much less visible fire particles, like those produced by flaming fires, sooner than photoelectric sensors. Nonetheless, photoelectric sensors are may very well detect larger, far more visible fire particles, such as those developed by smoldering fires, sooner than ionization sensors. Every single ought to pass identical overall performance standards to obtain third-party approval and meet Underwriters Laboratories (UL) 217, the independent normal to which alarms are listed. Considering that you do not know what sort of fire you will have in your home, specialists advise installing each forms of technology for optimal protection.
Experts Suggest Protection from Both Forms of FiresVirtually just about every recognized fire authority recommends the installation of each ionization and photoelectric alarms in order to maximize protection from either flaming or smoldering fires. Kidde delivers photoelectric smoke alarms, ionization smoke alarms, and dual sensor alarms, which combine both technologies in 1 unit. Regardless of the engineering, the most significant point is to make sure that you have operating smoke alarms on every floor of your house, inside every bedroom and outside sleeping areas. Studies show placing alarms in each bedrooms and hallways could improve a family's escape time by up to 15 minutes.
Fire Authorities recommending both smoke alarm technologies:
Trademarked Hush Feature for ConvenienceBy pressing the Hush button, you can simply and safely silence nuisance alarms triggered by non-emergency scenarios, such as overcooked dinners.
This function desensitizes the alarm for approximately seven minutes. Throughout this time, the alarm chirps each 30 to 40 seconds. If the smoke is also dense, the Hush function is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This hassle-free safety measure eliminates the temptation to eliminate the alarm's battery, which creates an unsafe scenario.
Wire-in Smoke Alarm with Dependable 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only assists guard you if it really is working, this unit characteristics a red LED that flashes just about every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of thoughts, the alarm consists of a test/reset button that enables you to periodically test its circuitry and horn.
The PI2010 is a wire-in smoke alarm with 9V battery backup, which supplies continuous protection against smoke and fire hazards even throughout power outages. The unit offers a low battery warning that challenges a brief chirp every single 30 to 40 seconds for at least seven days ahead of losing power, letting you know it is time to alter the battery.
The unit measures just 5.75 inches in diameter and 1.eight inches deep, and it functions a neutral, white finish. It functions tamper resist capabilities to deter vandalism or theft.
This dual-sensor smoke alarm is UL listed, so you can be confident of its good quality, and it is backed by a 10-year limited warranty.
About Kidde: A UTC Fire Security BrandRenowned for worldwide leadership in fire detection and suppression, Kidde gives options ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Security brand, with a history that is rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the improvement of the world's 1st wireless networked smoke detectors in 2004.
What is in the BoxDual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, 10-year limited warranty, and bilingual user's manual.
The Kidde PI2010 is a breeze to operate and has a hush function to temporarily silence alarms.
From the Manufacturer
The Kidde PI2010 is a 120VAC, wire-in smoke alarm with 9V battery backup. This smoke alarm functions as a stand alone unit or in an interconnected technique. The Kidde PI2010 features hush, allowing you to promptly silence nuisance alarms and also includes a tamper resist attributes that deters tampering and theft. The PI2010 contains a speedy connect power harness that makes it possible for for quick and painless installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms might detect invisible fire particles (linked with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (connected with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that each ionization and photoelectric smoke alarms be installed to aid insure maximum detection of the a number of varieties of fire that can take place within the home. The Kidde PI2010, 120VAC, wire-in smoke alarm with 9V battery backup delivers continuous protection against smoke and fire hazards, even for the duration of power outages. The combination of ionization and photoelectric sensors supply the top protection against each quickly flaming and slow smoldering fires. The Kidde PI2010 interconnects with up to 24 Kidde devices of which 18 can be initiating. This unit also includes flashing LEDs to signal the alarm is functioning properly, a low battery warning and a loud 85dB alarm. The Kidde PI2010 is UL Listed and contains a ten year restricted battery.
Customer Critiques
I didn't know about replacing smoke alarms each decade till rather lately. The units in my residence were two decades old, hardwired AC with no battery backup. They tested fine but immediately after twenty years it is certainly time to replace them by any standard. There are 3 in my house, 1 on every single floor.
Just after doing a bit of analysis and being a sensible consumer, I decided the PI2010 was the preferred selection out there. I bought them up at a neighborhood big box property center simply because the price was highly competitive with Amazon and I did not have to wait for shipping (even cost-free super saver shipping).
In the box was a mounting bracket, three-wire harness, instructions, screws, and the smoke alarm.
Installation was a breeze - shut off the power at the circuit breaker very first, removed the old alarms and harnesses subsequent. The instructions with the PI2010 produced it clear to not pull out the battery shipping tab until the units all had AC power applied. The mounting bracket was able to use the current screws so I did not have to even eliminate them from the ceiling box. The harness wired up very easily and right after plugging it into the alarm it only took a modest twist to secure it to the mounting mounting bracket. Immediately after turning the power back on, I pulled the battery tabs out of every alarm. I tested every a single, and had a buddy make positive the units on the other floors sounded also.
The alarms in this model are about twice as loud as my old smoke alarms, just about ear splitting loud so I believe there is no chance to sleep via it. A green LED tells you it has AC power and there is a red LED that flashes every single so regularly to say it is working. I may well locate the 'hush' feature valuable for my occasional kitchen disaster, but fanning a cookie sheet is my usual move when I burn a thing as well crispy.
The reality that the battery compartment is on the backside does not detract from the alarm. just a uncomplicated quarter twist and the unit comes off the bracket. On that note, it does have an anti-tamper function that if you opt for to activate, removing it from the bracket demands a read by means of the instructions and a lot a lot more work.
All in all, it was a breeze to install, it looks and feels qualified, it is the loudest alarm I've ever heard, and the hush feature is great.
I strategy on extending the wiring and installing these in each and every of the bedrooms, above and beyond minimum code.
Just purchased a home and the smoke detector was over 20 years old. After seeking at the various smoke detectors on the web, realized that I required a dual alarm with both photoelectric and ionization sensors for finest coverage. Most of the more affordable alarms are only ionization. This unit met my demands perfectly...
Dual sensor
Hard Wired (prior detector was tough wired)
Battery Backup
Hush button (for false alarms)
Got the alarm a few days prior to the estimated arrival date. Pulled the pieces out of the box (directions, bracket, unit, and wiring harness), did a swift appear by means of the directions and went to work. It seriously only took me about fifteen minutes to install...most of that time taking the old units bracket down and placing up the new one particular. The wiring harness has three wires...black, white and red...but the red a single has a plastic cover more than the end in case you do not require to wire various alarms together.
Soon after attaching the required wires to the property electric with wirenuts and electrical tape, just attach the bracket to the wall, make the confident the included battery is isntalled in the unit, plug the wiring harness into the back of the unit and attach to bracket. Piece o' cake.
If your dwelling already has a particular wiring harness, and you don't want to mess with electrical, I believe there are adaptors accessible for the back of this unit as nicely that can accept other shaped harnesses. Incredibly convenient, if you require them. For me, it was quite basic to cut the power and hook it up myself.
Related Product
No comments:
Post a Comment